DEVTOME.COM HOSTING COSTS HAVE BEGUN TO EXCEED 115$ MONTHLY. THE ADMINISTRATION IS NO LONGER ABLE TO HANDLE THE COST WITHOUT ASSISTANCE DUE TO THE RISING COST. THIS HAS BEEN OCCURRING FOR ALMOST A YEAR, BUT WE HAVE BEEN HANDLING IT FROM OUR OWN POCKETS. HOWEVER, WITH LITERALLY NO DONATIONS FOR THE PAST 2+ YEARS IT HAS DEPLETED THE BUDGET IN SHORT ORDER WITH THE INCREASE IN ACTIVITY ON THE SITE IN THE PAST 6 MONTHS. OUR CPU USAGE HAS BECOME TOO HIGH TO REMAIN ON A REASONABLE COSTING PLAN THAT WE COULD MAINTAIN. IF YOU WOULD LIKE TO SUPPORT THE DEVTOME PROJECT AND KEEP THE SITE UP/ALIVE PLEASE DONATE (EVEN IF ITS A SATOSHI) TO OUR DEVCOIN 1M4PCuMXvpWX6LHPkBEf3LJ2z1boZv4EQa OR OUR BTC WALLET 16eqEcqfw4zHUh2znvMcmRzGVwCn7CJLxR TO ALLOW US TO AFFORD THE HOSTING.

THE DEVCOIN AND DEVTOME PROJECTS ARE BOTH VERY IMPORTANT TO THE COMMUNITY. PLEASE CONTRIBUTE TO ITS FURTHER SUCCESS FOR ANOTHER 5 OR MORE YEARS!

Devtome Lists, Tables, and Quotes

To see how this is done, simply click on "edit page" - it's easy!

Formatting Syntax

Devtome supports some simple markup language, which tries to make the datafiles to be as readable as possible. This page contains all possible syntax you may use when editing the pages. Simply have a look at the source of this page by pressing “Edit this page”. If you want to try something, just use the playground page. The simpler markup is easily accessible via quickbuttons, too.

Basic Text Formatting

Devtome supports bold, italic, underlined and monospaced texts. Of course you can combine all these. Devtome supports bold, italic, underlined and monospaced texts. Of course you can combine all these. You can use subscript and superscript, too. You can use subscript and superscript, too. You can mark something as as well. You can mark something as deleted as well. Paragraphs are created from blank lines. If you want to force a newline without a paragraph, you can use two backslashes followed by a whitespace or the end of line. This is some text with some linebreaks Note that the two backslashes are only recognized at the end of a line or followed by a whitespace \\this happens without it. This is some text with some linebreaks
Note that the two backslashes are only recognized at the end of a line
or followed by
a whitespace \\this happens without it. You should use forced newlines only if really needed.

Devtome supports multiple ways of creating links.

External

External links are recognized automagically: http://www.show-me-the-devcoin.info or simply www.show-me-the-devcoin.info - You can set the link text as well: This Link points to Show me the Devcoin. Email addresses like this one: andi [at] splitbrain [dot] org are recognized, too. Devtome supports multiple ways of creating links. External links are recognized automagically: http://www.show-me-the-devcoin.info or simply www. show-me-the-devcoin.info You can set link text as well: This Link points to show-me-the-devcoin.. Email addresses like this one: noreply@show-me-the-devcoin.info are recognized, too. Internal

Internal links are created by using square brackets. You can either just give a pagename or use an additional link text.

Internal links are created by using square brackets. You can either just give a pagename or use an additional link text. Wiki pagenames are converted to lowercase automatically, special characters are not allowed. You can use namespaces by using a colon in the pagename. You can use namespaces by using a colon in the pagename. For details about namespaces see namespaces.

Linking to a specific section is possible, too. Just add the section name behind a hash character as known from HTML. This links to this Section. This links to this Section.

Notes:

  • Links to existing pages are shown in a different style from nonexisting ones.
  • Devtome does not use CamelCase to automatically create links by default, but this behavior can be enabled in the config file. Hint: If Devtome is a link, then it's enabled.
  • When a section's heading is changed, its bookmark changes, too. So don't rely on section linking too much.

Interwiki

Devtome supports Interwiki links. These are quick links to other Wikis. For example this is a link to Wikipedia's page about Wikis: Wiki.

Devtome supports Interwiki links. These are quick links to other Wikis.

For example this is a link to Wikipedia's page about Wikis: Wiki.

Windows Shares Windows shares like this are recognized, too. Please note that these only make sense in a homogeneous user group like a corporate Intranet.

Windows Shares like this are recognized, too.

Notes:

  • For security reasons direct browsing of windows shares only works in Microsoft Internet Explorer per default (and only in the “local zone”).
  • For Mozilla and Firefox it can be enabled through different workaround mentioned in the Mozilla Knowledge Base. However, there will still be a JavaScript warning about trying to open a Windows Share. To remove this warning (for all users), put the following line in conf/userscript.js:

LANG.nosmblinks = ;

Below is advanced syntax from DocuWiki - Devtomes Wiki solution.

Lists

Devtome supports ordered and unordered lists. To create a list item, indent your text by two spaces and use a * for unordered lists or a - for ordered ones.

   This is a list
   The second item
       You may have different levels
   Another item
   The same list but ordered
   Another item
       Just use indention for deeper levels
   That's it
 * This is a list
 * The second item
   * You may have different levels
 * Another item
 - The same list but ordered
 - Another item
   - Just use indention for deeper levels
 - That's it

Typography

Devtome can convert simple text characters to their typographically correct entities. Here is an example of recognized characters.

→ ← ↔ ⇒ ⇐ ⇔ » « – — 640×480 © ™ ® “He thought 'It's a man's world'…”

→ ← ↔ ⇒ ⇐ ⇔ » « – — 640×480 © ™ ® “He thought 'It's a man's world'…”

Quoting

Some times you want to mark some text to show it's a reply or comment. You can use the following syntax:

I think we should do it

No we shouldn't
Well, I say we should
Really?
Yes!
Then lets do it!

I think we should do it

   No we shouldn't
       Well, I say we should
   Really?
       Yes!
           Then lets do it!

Tables

Devtome supports a simple syntax to create tables. Heading 1 Heading 2 Heading 3 Row 1 Col 1 Row 1 Col 2 Row 1 Col 3 Row 2 Col 1 some colspan (note the double pipe) Row 3 Col 1 Row 3 Col 2 Row 3 Col 3

Table rows have to start and end with a | for normal rows or a ^ for headers.

Heading 1 Heading 2 Heading 3
Row 1 Col 1 Row 1 Col 2 Row 1 Col 3
Row 2 Col 1 some colspan (note the double pipe)
Row 3 Col 1 Row 3 Col 2 Row 3 Col 3

To connect cells horizontally, just make the next cell completely empty as shown above. Be sure to have always the same amount of cell separators!

Vertical tableheaders are possible, too.

Heading 1 	Heading 2

Heading 3 Row 1 Col 2 Row 1 Col 3 Heading 4 no colspan this time Heading 5 Row 2 Col 2 Row 2 Col 3

As you can see, it's the cell separator before a cell which decides about the formatting:

Heading 1 Heading 2
Heading 3 Row 1 Col 2 Row 1 Col 3
Heading 4 no colspan this time
Heading 5 Row 2 Col 2 Row 2 Col 3

You can have rowspans (vertically connected cells) by adding ::: into the cells below the one to which they should connect. Heading 1 Heading 2 Heading 3 Row 1 Col 1 this cell spans vertically Row 1 Col 3 Row 2 Col 1 Row 2 Col 3 Row 3 Col 1 Row 2 Col 3

Apart from the rowspan syntax those cells should not contain anything else.

Heading 1 Heading 2 Heading 3
Row 1 Col 1 this cell spans vertically Row 1 Col 3
Row 2 Col 1 Row 2 Col 3
Row 3 Col 1 Row 2 Col 3

You can align the table contents, too. Just add at least two whitespaces at the opposite end of your text: Add two spaces on the left to align right, two spaces on the right to align left and two spaces at least at both ends for centered text. Table with alignment right center left left right center xxxxxxxxxxxx xxxxxxxxxxxx xxxxxxxxxxxx

This is how it looks in the source:

Table with alignment
right center left
left right center
xxxxxxxxxxxx xxxxxxxxxxxx xxxxxxxxxxxx

Note: Vertical alignment is not supported.

No Formatting

If you need to display text exactly like it is typed (without any formatting), enclose the area either with tags or even simpler, with double percent signs %%. This is some text which contains addresses like this: http://www.splitbrain.org and **formatting**, but nothing is done with it. The same is true for //__this__ text// with a smiley ;-). <nowiki> This is some text which contains addresses like this: http://www.splitbrain.org and **formatting**, but nothing is done with it. The same is true for //__this__ text// with a smiley ;-).

Code Blocks

You can include code blocks into your documents by either indenting them by at least two spaces (like used for the previous examples) or by using the tags

 or <file>.

This is text is indented by two spaces.

This is preformatted code all spaces are preserved: like              <-this

This is pretty much the same, but you could use it to show that you quoted a file.

Those blocks were created by this source:

  This is text is indented by two spaces.

<code>
This is preformatted code all spaces are preserved: like              <-this

This is pretty much the same, but you could use it to show that you quoted a file.

Syntax Highlighting

Devtome an highlight sourcecode, which makes it easier to read. It uses the GeSHi Generic Syntax Highlighter – so any language supported by GeSHi is supported. The syntax uses the same code and file blocks described in the previous section, but this time the name of the language syntax to be highlighted is included inside the tag, e.g. <code java> or

.

/**
 * The HelloWorldApp class implements an application that
 * simply displays "Hello World!" to the standard output.
 */
class HelloWorldApp {
    public static void main(String[] args) {
        System.out.println("Hello World!"); //Display the string.
    }
}

The following language strings are currently recognized: 4cs, 6502acme, 6502kickass, 6502tasm, 68000devpac, abap, actionscript-french, actionscript, actionscript3, ada, algol68, apache, applescript, asm, asp, autoconf, autohotkey, autoit, avisynth, awk, bascomavr, bash, basic4gl, bf, bibtex, blitzbasic, bnf, boo, c, c_loadrunner, c_mac, caddcl, cadlisp, cfdg, cfm, chaiscript, cil, clojure, cmake, cobol, coffeescript, cpp, cpp-qt, csharp, css, cuesheet, d, dcs, delphi, diff, div, dos, dot, e, epc, ecmascript, eiffel, email, erlang, euphoria, f1, falcon, fo, fortran, freebasic, fsharp, gambas, genero, genie, gdb, glsl, gml, gnuplot, go, groovy, gettext, gwbasic, haskell, hicest, hq9plus, html, html5, icon, idl, ini, inno, intercal, io, j, java5, java, javascript, jquery, kixtart, klonec, klonecpp, latex, lb, lisp, llvm, locobasic, logtalk, lolcode, lotusformulas, lotusscript, lscript, lsl2, lua, m68k, magiksf, make, mapbasic, matlab, mirc, modula2, modula3, mmix, mpasm, mxml, mysql, newlisp, nsis, oberon2, objc, objeck, ocaml-brief, ocaml, oobas, oracle8, oracle11, oxygene, oz, pascal, pcre, perl, perl6, per, pf, php-brief, php, pike, pic16, pixelbender, pli, plsql, postgresql, povray, powerbuilder, powershell, proftpd, progress, prolog, properties, providex, purebasic, pycon, python, q, qbasic, rails, rebol, reg, robots, rpmspec, rsplus, ruby, sas, scala, scheme, scilab, sdlbasic, smalltalk, smarty, sql, systemverilog, tcl, teraterm, text, thinbasic, tsql, typoscript, unicon, uscript, vala, vbnet, vb, verilog, vhdl, vim, visualfoxpro, visualprolog, whitespace, winbatch, whois, xbasic, xml, xorg_conf, xpp, yaml, z80, zxbasic 

===Downloadable Code Blocks===


When you use the <code> or <file> syntax as above, you might want to make the shown code available for download as well. You can do this by specifying a file name after language code like this:

<file php myexample.php>
<?php echo "hello world!"; ?>

myexample.php

   

If you don't want any highlighting but want a downloadable file, specify a dash (-) as the language code: <code - myfile.foo>.

Embedding HTML and PHP

You can embed raw HTML or PHP code into your documents by using the  or  tags. (Use uppercase tags if you need to enclose block level elements.)

HTML example:

This is some <span style="color:red;font-size:150%;">inline HTML</span>

<p style="border:2px dashed red;">And this is some block HTML</p>

This is some <span style=“color:red;font-size:150%;”>inline HTML</span>

<p style=“border:2px dashed red;”>And this is some block HTML</p>

PHP example:

echo 'A logo generated by PHP:'; echo '<img src="' . $_SERVER['PHP_SELF'] . '?=' . php_logo_guid() . '" alt="PHP Logo !" />'; echo '(generated inline HTML)';

echo '<table class="inline"><tr><td>The same, but inside a block level element:</td>';
echo '<td><img src="' . $_SERVER['PHP_SELF'] . '?=' . php_logo_guid() . '" alt="PHP Logo !" /></td>';
echo '</tr></table>';

echo 'A logo generated by PHP:'; echo '<img src=”' . $_SERVER['PHP_SELF'] . '?=' . php_logo_guid() . '” alt=“PHP Logo !” />'; echo '(inline HTML)';

echo '<table class=“inline”><tr><td>The same, but inside a block level element:</td>'; echo '<td><img src=”' . $_SERVER['PHP_SELF'] . '?=' . php_logo_guid() . '” alt=“PHP Logo !” /></td>'; echo '</tr></table>';

Please Note: HTML and PHP embedding is disabled by default in the configuration. If disabled, the code is displayed instead of executed.

RSS/ATOM Feed Aggregation

Devtome can integrate data from external XML feeds. For parsing the XML feeds, SimplePie is used. All formats understood by SimplePie can be used in Devtome as well. You can influence the rendering by multiple additional space separated parameters: Parameter Description any number will be used as maximum number items to show, defaults to 8 reverse display the last items in the feed first author show item authors names date show item dates description show the item description. If HTML is disabled all tags will be stripped n[dhm] refresh period, where d=days, h=hours, m=minutes. (e.g. 12h = 12 hours).

The refresh period defaults to 4 hours. Any value below 10 minutes will be treated as 10 minutes. Devtome will generally try to supply a cached version of a page, obviously this is inappropriate when the page contains dynamic external content. The parameter tells Devtome to re-render the page if it is more than refresh period since the page was last rendered.

Example:

   Apple Revises Warranty Policies In Europe To Comply With EU Laws by samzenpus (2013/06/13 11:30)
   SSDs: The New King of the Data Center? by samzenpus (2013/06/13 09:08)
   Dmitry Itskov Wants To Help You Live Forever Via an Android Avatar by samzenpus (2013/06/13 06:32)
   The Trajectory of Television: A Big History of the Small Screen. by samzenpus (2013/06/13 03:52)
   Genomics Impact On US Economy Approaches $1 Trillion by samzenpus (2013/06/13 01:57)

Control Macros

Some syntax influences how Devtome renders a page without creating any output it self. The following control macros are availble: Macro Description If this macro is found on the page, no table of contents will be created Devtome caches all output by default. Sometimes this might not be wanted (eg. when the <php> syntax above is used), adding this macro will force Devtome to rerender a page on every call

Syntax Plugins

Devtome's syntax can be extended by Plugins. How the installed plugins are used is described on their appropriate description pages. The following syntax plugins are available in this particular Devtome installation:

   Info Plugin 2013-02-16 by Andreas Gohr
   Displays information about various Devtome internals
   PHPXref Plugin 2008-10-03 by Andreas Gohr
   Makes linking to a PHPXref generated API doc easy.
   DokuTeaser Plugin 2013-02-16 by Andreas Gohr
   A plugin for internal use on Devtome.org only
   Structured Data Plugin 2013-02-22 by Andreas Gohr
   Add and query structured data in your wiki
   Translation Plugin 2012-02-06 by Andreas Gohr
   Supports the easy setup of a multi-language wiki.
   Repository plugin 2012-11-06 by Andreas Gohr/Håkan Sandell
   Helps organizing the plugin repository
   Gallery Plugin 2013-02-16 by Andreas Gohr
   Creates a gallery of images from a namespace or RSS/ATOM feed
   unblink plugin 2010-09-05 by Andreas Gohr
   link to UNB profile pages


 

Advertise with Anonymous Ads